Universal release agent for polyester epoxy, PU & silicone

Cleaning agent A 1 L

Is a liquid, highly flammable cleaning agent based on acetone. Supplied as a 99% concentrate. Available in 1, 5, 25 L and 160 kg drum.

Air bleed roller Alu 10 x 100 mm

An aluminum de-aeration roller is indispensable when working with polyester and epoxy laminates, where effectively removing air bubbles is essential for a smooth and professional finish. Available in various sizes, this roller offers versatility for a range of applications in composite and lamination techniques. By eliminating air bubbles during the application of materials such as resins, the de-aeration roller contributes to a seamless finish and improves adhesion and durability of the material. The aluminum construction of the roller provides practical advantages such as chemical resistance, resulting in long-lasting and reliable performance under intensive use. The ergonomic design ensures comfort during extended use, enhancing work efficiency without compromising quality. In short, an aluminum de-aeration roller is a valuable tool for both professionals and hobbyists seeking high-quality finishes and optimal performance in their composite and laminate projects. Available in the following sizes: Ø 12 mm - width 35 mm Ø 10 mm - width 100 mm Ø 12 mm - width 140 mm R284

Ontluchtingsrol alu-V 21x140 MM

An aluminum de-aeration roller is indispensable when working with polyester and epoxy laminates, where effectively removing air bubbles is essential for a smooth and professional finish. Available in various sizes, this roller offers versatility for a range of applications in composite and lamination techniques. By eliminating air bubbles during the application of materials such as resins, the de-aeration roller contributes to a seamless finish and improves adhesion and durability of the material. The aluminum construction of the roller provides practical benefits such as chemical resistance, resulting in long-lasting and reliable performance under intensive use. The ergonomic design ensures comfort during extended use, enhancing work efficiency without compromising quality. In short, an aluminum de-aeration roller is a valuable tool for both professionals and hobbyists seeking high-quality finishes and optimal performance in their composite and laminate projects. Available in the following sizes: Ø 12 mm - width 35 mm Ø 10 mm - width 100 mm Ø 12 mm - width 140 mm

Accelerator cobalt 1% 0.5 KG

Is a cobalt octoate accelerator in a dibutyl phthalate solution at a 1% concentration. This is used for the pre-acceleration of polyester resins, vinyl ester resins, topcoat, or gelcoat. Available in 500 g, 5 kg, 25 kg, and 200 kg packages.

Polyester dye 1013 200 G

This is a color pigment in paste form for coloring polyester resin, topcoats, and gelcoats. These color pastes are styrene-free.

Ontluchtingsrol metaal flexi 25 x 90 MM

The flexible metal bleed roller with a wooden handle is ideal for bleed-drying polyester, epoxy, and vinyl ester on uneven surfaces. The roller follows the contours of the surface, effectively removing air bubbles and imperfections. This ensures a smooth and even finish for your laminates, improving the overall quality of the project. By preventing air entrapment, this roller contributes to a strong and aesthetically pleasing finish. Available in the following sizes: Ø 25 mm - width 90 mm Ø 40 mm - width 130 mm

Fiberglass 300 G PB 1 M²

Fiberglass 450 G PB 1 M²

Reinforcement material used in the construction of laminates. The structure of the fabrics provides increased strength. This glass fiber fabric can be used in combination with liquid polyester, vinyl ester, and epoxy resins. It is primarily used as a construction material and reinforcement. With this fabric, you can stack multiple layers to increase strength. It becomes almost completely transparent during processing. Thanks to the powder bond (PB), it is suitable for parts that come into contact with water. Available in roll widths of 127 cm and 260 cm and pre-packaged in 1 m², 5 m², and 10 m² or in rolls of approximately 45 kg.

Fiberglass 300 G PB 15TEX 10 M²

Glastape 290 G - 25 MM

Is a reinforcing material used for the construction of laminates with polyester, epoxy and vinylester.

Glasweefsel 80 G 1 M²

Reinforcement material used in the construction of laminates with polyester, epoxy, and vinyl ester. The structure of the fabric provides increased strength. Available in various designs and weights. Available in 1, 5, and 10 m² pre-packaged and in rolls of 50 kg or 100 m.

Glasmat 225 G PB 1 m²

Reinforcement material used in the construction of laminates. The structure of the fabrics provides increased strength. This glass fiber fabric can be used in combination with liquid polyester, vinyl ester, and epoxy resins. It is primarily used as a construction material and reinforcement. With this fabric, you can stack multiple layers to increase strength. It becomes almost completely transparent during processing. Thanks to the powder bond (PB), it is suitable for parts that come into contact with water. Available in roll widths of 127 cm and 260 cm and pre-packaged in 1 m², 5 m², and 10 m² or in rolls of approximately 45 kg.

Glasweefsel 160 G keper 1 M²

Reinforcement material used in the construction of laminates with polyester, epoxy, and vinyl ester. The structure of the fabric provides increased strength. Available in various designs and weights. Available in 1, 5, and 10 m² pre-packaged and in rolls of 50 kg or 100 m.

Glasweefsel 400 G 1 M²

Reinforcement material used in the construction of laminates with polyester, epoxy, and vinyl ester. The structure of the fabric provides increased strength. Available in various designs and weights. Available in 1, 5, and 10 m² pre-packaged and in rolls of 50 kg or 100 m.

Harder Mekp FL 505 SN 29 G

A liquid, highly flammable hardener based on methyl ethyl ketone peroxide, intended for use with polyester and vinyl ester resins. Must never be used in direct combination with cobalt to avoid an explosive reaction. Available in 29 g, 100 g, 500 g, 1 kg, 5 kg, and 25 kg packaging.

Milled glass fiber 0.2 MM 5 KG

Reinforcing fibers consisting of E-glass filament with a chromium silane and siloxane bond. These are cut to lengths of 0.2 mm. The fibers are mixed with the resin to improve its strength.Available in 5 kg and 30 kg packages.

Air bleed roller plastic 40 x 8 MM

The plastic de-airing roller is an essential tool for professionals working with polyester, vinylester, and epoxy laminates. With variants such as Ø 12 mm with a width of 50 mm and Ø 40 mm with a width of 80 mm, this roller provides versatility and precision when de-airing materials during production processes. Air bubbles and excess air are often problematic when laminating composites, as they can compromise structural integrity and aesthetic quality. The de-airing roller ensures even material distribution, helping to prevent these issues and resulting in an improved final product quality. A major advantage of the plastic de-airing roller is its ergonomic and user-friendly design, which makes the de-airing process efficient and comfortable. This contributes to increased productivity and accuracy in production environments. By selecting the appropriate size for specific applications, users can tailor the de-airing roller to their exact needs, contributing to consistent and reliable production. Using this roller is therefore not only an investment in quality but also a strategy to reduce waste and improve overall efficiency in composite material production processes. Available in the following sizes: Ø 12 mm - width 50 mm Ø 12 mm - width 100 mm Ø 40 mm - width 8 mm

Paint tray 14.5 x 28 CM

These handy PE paint buckets are ideal for painting or coating with cold-curing plastics. Due to their composition, they are resistant to most solvents and products. Allow polyester and epoxy to cure, and you can easily remove these materials afterwards as they do not stick to the PE. Available in various sizes.

T40BT kleurloos 5 KG

This is a two-component, pre-accelerated polyester sealant (precoat) based on neopentyl glycol and terephthalic acid that, after curing, offers good water and chemical resistance. It should always be finished with a Topcoat LT 40 SB.Available in 5 kg, 20 kg, and 225 kg packaging, in colorless or pre-colored grayish white in 5 kg, 10 kg, and 20 kg.

T35-1 7016 1 KG

Water- and UV-resistant topcoat based on a special polyester. Suitable for moulded parts or components exposed to water, such as boats, swimming ponds and water collection tanks.Available in various colours and packaging options.Must always be used in combination with the Mekp hardener.

LT40SB kleurloos 1 KG + Mekp

Is a two-component, pre-accelerated topcoat based on neopenthyl glycol terephthalic acid that, after curing, has good chemical, water, and UV-resistant properties at operating temperatures of water up to 30°C. Resistant to chlorinated water and hydrogen peroxide (for normal swimming pool use).Available in 1, 5, 20, and 225 kg packaging (colorless) and in 5, 10, and 20 kg packaging pre-colored in five colors.Due to its unique composition with terephthalic acid, this topcoat has an extremely high resistance to osmosis and to the symptoms of black dots in old polyester layers.

Release wax treil part 310 0.5 L

Is a liquid, reactive, semi-permanent release agent suitable for polyester resin, vinyl ester, epoxy, and DCPD resins. Suitable for GRP and metal molds. Available in 0.5 liter and 20 liter containers.

Premium release agent 450 G

Is a paste-form release agent designed for high-speed processing. Formulated for rapid drying. Very easy to apply and remove afterward. Heat resistant up to 140°C. Compatible with the PVA Partall Coverall. Available in 450 g packages.

Chopped glass fiber 2 -6 MM 1 KG

Reinforcement fibers consisting of E-glass filament with a chromium silane and siloxane bond. These are cut to lengths of 3-5 mm. The fibers are mixed with the resin to improve its strength. Available in 1 kg, 10 kg, and 20 kg packages.