Repair amusement park and fairground attractions with V-Sure

Acetone-based cleaner 1 l - removes paint, glue or resin - 5 l

Cleaning agent A 5 L

Is a liquid, highly flammable cleaning agent based on acetone. Supplied as a 99% concentrate. Available in 1, 5, 25 L and 160 kg drum.

Cobalt accelerator for polyester resin

Accelerator cobalt 1% 0.5 KG

Is a cobalt octoate accelerator in a dibutyl phthalate solution at a 1% concentration. This is used for the pre-acceleration of polyester resins, vinyl ester resins, topcoat, or gelcoat. Available in 500 g, 5 kg, 25 kg, and 200 kg packages.

Colour pigment for PU, polyester or epoxy - white - RAL 5010 - 10 g

PUR dye blue 10 G

These are special solvent-free pigments dissolved in polyols for colouring PU coatings, resins, lacquers and foams. Available in white, yellow, red, blue, green, black or in a set of 6 colours. Available in 10 g and 1 kg packages.

Colourant for polyester resin, gel coats and topcoats - RAL 5024 - 200 g

Polyester kleurstof KVS pastel blauw 200 G

This is a color pigment in paste form for coloring polyester resin, topcoats, and gelcoats. These color pastes are styrene-free.

Cut fibreglass - reinforcement for plastics - 25 kg

Chopped glass fiber 2 - 6 MM 25 KG

Reinforcement fibers consisting of E-glass filament with a chromium silane and siloxane bond. These are cut to lengths of 3-5 mm. The fibers are mixed with the resin to improve its strength. Available in 1 kg, 10 kg, and 20 kg packages.

Durable glossy varnish for wood, glass, plastic and metal - RAL 9005 - 750 ml

Besa urki voc lacquer glossy 9005 A+B 750 ML

Two-component durable, high-coverage and slightly elastic PUR lacquer for finishing wood, glass, plastic, metal and non-ferrous metals. Extremely resistant to sun, water, chemicals and diluted acids and alkalis. Retains its high gloss and is UV resistant. Ideal for spraying with a spray gun. Limited number of colours available in 750 ml (A+B)According to RAL colour in 5 litre and 20 litre containers (A-comp)

Flexibele ontluchtingsrol in metaal - voor het verwijderen van luchtbellen uit epoxy en polyester - 130 mm

Ontluchtingsrol metaal flexi 40 x 130 MM

The flexible metal bleed roller with a wooden handle is ideal for bleed-drying polyester, epoxy, and vinyl ester on uneven surfaces. The roller follows the contours of the surface, effectively removing air bubbles and imperfections. This ensures a smooth and even finish for your laminates, improving the overall quality of the project. By preventing air entrapment, this roller contributes to a strong and aesthetically pleasing finish. Available in the following sizes: Ø 25 mm - width 90 mm Ø 40 mm - width 130 mm

Glass fibre - glass mat fibre - roll

Fiberglass 450 G PB VS roll 102 M²

Reinforcement material used in the construction of laminates. The structure of the fabrics provides increased strength. This glass fiber fabric can be used in combination with liquid polyester, vinyl ester, and epoxy resins. It is primarily used as a construction material and reinforcement. With this fabric, you can stack multiple layers to increase strength. It becomes almost completely transparent during processing. Thanks to the powder bond (PB), it is suitable for parts that come into contact with water. Available in roll widths of 127 cm and 260 cm and pre-packaged in 1 m², 5 m², and 10 m² or in rolls of approximately 45 kg.

Glass fibre - glass mat fibre - roll

Fiberglass 300 G PB VS roll 140 M²

Mixer - stirrer

Mixer mini

Plastic mixing rod for mixing small quantities of resin.

Mondmasker Starmask met stof - en solvent filter

Mondmasker starmask met stof-en solvent filter (A2P2R)

The Star Mask is a respirator with replaceable pre-filters and gas filters. The Star Mask protects against mist from paint, varnish, enamel, pesticides, organic vapors, and dust and is approved according to CE standards CE 0194/EN 140:198; EN 143:2004; and A1:2008. The replaceable filter system ensures maximum protection, even during extended use. Filters available separately.

Overalls - Workwear for everyone - L - xlarge

Overall PP shield met kap XL

When working with cold-curing plastics, we always recommend wearing protective clothing. This protective coverall is a perfect option. The protective coverall with hood is essential equipment for professionals and hobbyists who work with cold-curing plastics and other chemicals. This coverall offers excellent protection thanks to its waterproofness and high chemical resistance to a wide range of resins and solvents. This waterproof and protective coverall is lightweight and therefore comfortable to wear. Thanks to its exceptional chemical resistance, it protects you against all resins and solvents. This coverall is extremely durable and can therefore be worn for several hours or even days. Available in L, XL, and XXL.

Oxalic acid - cleaning agent

Cleaning agent oxalic acid 0.5 KG

Powerful cleaner that effortlessly revitalizes yellowed gelcoat, plastic, and painted surfaces. Can also be applied to wood to restore its original color. Contains an acid that cleanses the surface. Available in a 500 g package.

Paraffin oil - Liquid paraffin wax

Paraffin solution 5% 1 L

Is a 5% liquid paraffin wax of exceptionally high quality, dissolved in styrene. Can be mixed with all polyester resins and vinyl ester resins. Available in 1 liter and 10 kg packages.

Polish S4 protect wax

Polish S4 protect wax 250 ML

SL Polish S4 Protect Wax is a liquid sealing emulsion based on wax. S4 Protect Wax contains very fine, high-quality ingredients with cleansing properties that do not leave any scratching marks.

Polishing cloth microfibre - Polishing cloth

Polish microfibre cloth 40 x 40 CM

These microfiber cloths are specifically designed for cleaning and polishing Sealine products. In particular, the Finish Cleaner S3 as well as the Quick Wax S5 are suitable for use with these cloths, ensuring the desired high-gloss finish.

Polishing pad - Polishing with lambswool 150 mm - white - 180 mm

Polishing pad lambswool type MM white 180 MM

These polishing pads are made from 100% lambswool and are specially designed for polishing gelcoats, paints, PU varnishes, plexiglass, and polycarbonates. Wool polishing pads have the advantage of dissipating heat generated during polishing, allowing you to polish at higher speeds and faster than with foam pads. They are highly durable and can be used for a long time, making them much more long-lasting than foam pads with daily use.The MM type has a cut level of 4 (equivalent to a 1200-grit) and is suitable for Sealine S1, S1 Prem, and S2.The D type has a cut level of 7 (equivalent to an 800-grit) and is ideal for all Sealine polishing compounds.

Polishing pad - Polishing with wool pad - 1 side

Polishing pad wool 1 side 22 CM

These polishing coats are made of 100% natural wool and are specially designed for polishing gel coats, lacquers, pu varnish, plexiglass and polycarbonates. Wool polishing coats have the advantage that the heat released during polishing can escape, so you can polish at higher speeds and faster than with a foam coat. You can use them for a very long time, so in daily use they are also much more durable than foam coats. These woollen polishing coats have a Cut level of 10 (comparable to 400 grit) and are therefore extremely suitable for all our polishing pastes, in particular for Sealine's S05-S01-S07-S08.

Polishing pad - Polishing with wool pad - 2 sides

Polishing pad wool 2 sides 22 CM

These polishing pads are made from 100% natural wool and are specially designed for polishing gelcoats, paints, PU varnishes, plexiglass, and polycarbonates. Wool polishing pads have the advantage of dissipating heat generated during polishing, allowing you to polish at higher speeds and faster than with foam pads.They are extremely durable and can be used for a long time, making them much more long-lasting compared to foam pads with daily use. These wool polishing pads have a cut level of 10 (equivalent to a 400-grit) and are therefore ideal for all our polishing compounds, particularly the S05, S01, S07, and S08 from Sealine.

Polishing pad holder 150 mm - Polishing with wool pad

Holder for polish pad yellow 150 for pad 180-200 MM

Universal pad holder for polishing pads of various diameters, allowing you to polish Sealine products. Tip: When using wool polishing pads, the pads should always be smaller in diameter than the wool polishing pad itself. Size 120 is suitable for pads from 130mm to 150mm Size 150 is suitable for pads from 130mm to 200mm

Polishing paste - Plastic polishing - High gloss - 1,2 kg

Polish S1 one step cut & high gloss 1.2 KG

SL Polish S1 One Step Cut and High Gloss is a polishing paste designed for a high-gloss finish. It is specifically supplied in liquid form to allow precise dosing.Available in 100 g, 600 g, and 1200 g packages.

Polishing paste finish - Boost gloss and colour

Polish S3 finish cleaner 500 ML

SL Polish S3 Finish Cleaner is a liquid cleaning agent free of silicone. It provides optimal and thorough cleaning of gelcoat, aluminium, metals, and various plastics. Effective even against the most stubborn contaminants such as greases, oils, soot, etc. Available in a 500 ml packaging.

Polishing paste for extra shine - Plastic polishing compound

Polish S2 extra shine hologram remover 500 G

Is a liquid polishing emulsion designed to make surfaces shine and gloss, suitable for substrates made of polyester, epoxy, polyurethane, and other materials. Highly recommended as a final treatment after using the SL Premium One Step, Cut & High Gloss. Available in a 500 g package.

Polyester bonding paste - all purpose adhesive 25 kg

Hechtingspasta KL 1 25 KG

This is a two-component, white, filled, and pre-accelerated adhesive paste based on ortho-resin. It is extremely suitable for bonding, offering good impact resistance and resistance to most diluted chemicals.Available in 25 kg packages.