Epoxy primer
In the Epoxy Primer category, you will find the right products to complement your treatment with epoxy resin.
V-Sure Epoxy primers provide a strong substrate on which you can work perfectly with epoxy resin and fibreglass. Moreover, epoxy primers have a high resistance and offer good protection against water. Epoxy primers are a perfect base layer for lacquers and antifoulings.
V-Sure Epoxy thinners are the perfect additive to dilute epoxy resins or to clean an already treated surface.
Be sure to also take a look at the Epoxy Anti-osmosis and Anti-corrosion primers. These will make your treated surface even more resistant to weathering.
Epoxy anti-corrosion primer A+B 750 ML
A high-quality, two-component, solvent-free, amine-based epoxy primer. The fully cured layer has a very high resistance and is an effective barrier against water. The cured layer does not allow water (vapour) to pass through. Available in 750 ml and 7.50 litre containers.
Epoxy light primer white A+B 750 ML
A high-quality, polyamide-based, two-component epoxy primer. The fully cured layer has a very high resistance and is a good barrier against water. The cured layer does not allow water (vapour) to pass through. No sanding is required between coats. Available in 750 ml, 3 l and 5 l containers in white and 750 ml, 3 l and 15 l in grey.
Epoxy primer fast A+B 1.5 KG
This is a two-component epoxy primer that can be used for sealing and bonding on almost all surfaces. It is applied as a primer for epoxy floor paint or a PU cast floor or coating. This primer can also be used as a water-repellent layer on numerous surfaces. This makes it ideal for waterproofing basements and damp areas. Can be painted over with any lacquer paint. Available in 1.5 kg, 3 kg and 10 kg containers.
Epoxy anti-osmosis & corrosion spray 400 ML
A high-quality, polyamide-based, two-component epoxy primer. The fully cured layer has a very high resistance and is an effective barrier against water. The cured layer does not allow water (vapour) to pass through. No sanding is required between coats. Available in a convenient 400 ml spray can.