V-Sure: ultimate solutions for bodywork repair
Efficient repair of metal and plastic parts
Durable finish with reliable products
Repairing damaged bodywork requires precision, expertise, and the right materials. With V-Sure, you choose products specifically designed for body repairers: primers, coatings, polyester and epoxy resins. Each product is optimized for adhesion, scratch resistance, and UV protection, ensuring a professional and long-lasting repair.
Our fillers and paints provide a smooth finish, while our polyester resins allow easy repair of small and large surfaces in metal and plastic. Fast drying times and easy application make your work more efficient, reducing preparation time.
All V-Sure products are available from stock and tested for long-lasting performance. Trust our materials to execute every repair project professionally from start to finish.
Call to action
15 min fast curing Methacrylate adhesive beige syringe 50 ml
Methacrylate adhesive M7-15 ivory dual-component syringe 50 ml
Extremely strong structural adhesive based on 2-component MMA technology. Rapid bonding within 15 minutes and beige in colour. Available in a 50 ml cartridge that can be applied using a 2K gun, manually or with compressed air.
50 ml injection and glue syringe
Glue syringe 50 ML
Empty syringe for injecting thin-viscosity polyester and epoxy resin during minor repairs where injection under pressure is required. Ideal for repairs to surfboards and gelcoat. This handy tool also comes in very useful for adding colourants to Resin Art.
Anti rust primer - epoxy primer 750 ml
Epoxy anti-corrosion primer A+B 750 ML
A high-quality, two-component, solvent-free, amine-based epoxy primer. The fully cured layer has a very high resistance and is an effective barrier against water. The cured layer does not allow water (vapour) to pass through. Available in 750 ml and 7.50 litre containers.
Cleaning products - Degreaser
Cleaning agent DX 1 L
Chlorine-free cleaning agent specifically developed for the removal of uncured resin residues during the production of molded parts made of polyester, polyurethane, or epoxy. Cleaning agent DX has low toxicity. Available in 1 L, 5 L, 10 L, and 210 L containers.
Epoxy primer for all surfaces - white - 750 ml
Epoxy light primer white A+B 750 ML
A high-quality, polyamide-based, two-component epoxy primer. The fully cured layer has a very high resistance and is a good barrier against water. The cured layer does not allow water (vapour) to pass through. No sanding is required between coats. Available in 750 ml, 3 l and 5 l containers in white and 750 ml, 3 l and 15 l in grey.
Epoxy putty - Epoxy filler and finishing putty 750 g
Epoxy universal filler grey A+B 750 G
A two-component epoxy finishing filler for filling unevenness and holes in polyester, epoxy or wood, both above and below the waterline of the boat.
Face mask Starmask with dust- and solvent filter
Face mask starmask with dust -and solvent filter (A2P2R)
The Star Mask is a respirator with replaceable pre-filters and gas filters. The Star Mask protects against mist from paint, varnish, enamel, pesticides, organic vapors, and dust and is approved according to CE standards CE 0194/EN 140:198; EN 143:2004; and A1:2008. The replaceable filter system ensures maximum protection, even during extended use. Filters available separately.
Fast and safe mixing of adhesive 25-50 ML 1:1
Mixer for dual-chamber glue syringe 25-50 ML 1:1
A special mixer designed for the homogeneous mixing of two-component adhesives and sealants in a 1:1 mixing ratio. Suitable for 25 ml and 50 ml cartridges.
Fast curing Methacrylate adhesive beige syringe 50 ml
Methacrylate adhesive M7-05 ivory dual-component syringe 50 ml
Extremely strong structural adhesive based on 2-component MMA technology. Rapid bonding within 5 minutes and beige in colour. Available in a 50 ml cartridge for application using a 2K gun.
Fast curing Methacrylate adhesive dark grey syringe 50 ml
Methacrylate adhesive M1-05 dark grey dual-component syringe 50 ml
Extremely strong structural adhesive based on 2-component MMA technology. Rapid bonding within 5 minutes and grey in colour.Available in a 50 ml cartridge for application using a 2K gun.
Fast drying two-component multi purpose glue
Methacrylate glue multipower 24 G
A two-component methacrylate adhesive for bonding different materials. Once cured, it offers excellent impact and pressure resistance as well as sound insulation.Available in convenient 24 g tubes.
Filters for face mask - protecting mask for polyester
Solvent filter for Sstarmask face mask (A2 )
These replaceable filters ensure maximum protection, even in prolonged use. They are active carbon filters that offer protection when working with epoxy and polyester and when sanding. Matching mouth mask available separately.
Glass fiber reinforced polyester filler - For bonding and filling
Ferro glass + BPO 1.8 KG
This is a two-component, fiberglass-filled filler. It sands easily, has minimal shrinkage, and doesn't stick to the surface. Specifically designed for deep fills. Can be applied to any desired thickness.Available in 1.8 kg packaging.
Glass fibre - glass mat fibre 450 g - 1 m²
Fiberglass 450 G PB 1 M²
Reinforcement material used in the construction of laminates. The structure of the fabrics provides increased strength. This glass fiber fabric can be used in combination with liquid polyester, vinyl ester, and epoxy resins. It is primarily used as a construction material and reinforcement. With this fabric, you can stack multiple layers to increase strength. It becomes almost completely transparent during processing. Thanks to the powder bond (PB), it is suitable for parts that come into contact with water. Available in roll widths of 127 cm and 260 cm and pre-packaged in 1 m², 5 m², and 10 m² or in rolls of approximately 45 kg.
Glass fibre - strong glass fabric 1 m²
Glass fabric 400 G 1 M²
Reinforcement material used in the construction of laminates with polyester, epoxy, and vinyl ester. The structure of the fabric provides increased strength. Available in various designs and weights. Available in 1, 5, and 10 m² pre-packaged and in rolls of 50 kg or 100 m.
Glass fibre epoxy putty 750 gr -Fibre reinforced epoxy filler
Epoxy fiberglass filler grey A+B 750 ML
This is a two-component, solvent-free, fibre-reinforced filler based on epoxy. This filler can be applied in layers up to 10 mm thick without shrinking. Available in 750 kg and 7.5 kg containers.
Handy plastic spatula for filler
Plastic spatula, red, 115 mm x 77 mm
Professional-grade stainless steel filling knife for applying decorative plaster. Sturdy and featuring an ergonomic grip for comfortable use over long periods. Easy to clean after use, with either water or solvents.
Hardener for polyester putty - red
Harder BPO red tube 50 G
A flammable hardener based on benzoyl peroxide for use with polyester filler. Can only be used in combination with amine-accelerated resins and fillers. Available in 50 g tubes.
Hardner for durable lacquer paint for wood, glass, plastic and metal - 250 ml
Besa urki hardener B-comp. E225 250 ML
The hardener for the two-component durable, well-covering and slightly elastic PUR lacquer for finishing wood, glass, plastic, metal and non-ferrous metals. Highly resistant to sunlight, water, chemicals and diluted acids and alkalis. Retains its (satin) gloss and is UV-resistant. Has an M1 fire-retardant effect according to UNE 23727-90 and is F1 classified according to NF- F-16101. The hardener is available separately in 250 ml, 1 litre, 2.5 litre and 5 litre containers. A hardener is supplied as standard with the small containers.
Liquid metal - metal putty paste
Steelbond 125 G
Is a 2-component epoxy filled with metallic fillers. Steelbond is as easy to apply as putty and, once cured, can be worked like metal. It can be sanded, drilled, or milled. Available in 125 g packaging.
Measuring pipette for exact measurements
Measuring pipette 3 ML
This PE measuring pipette is suitable for the various types of hardeners commonly used when processing cold-curing plastics, such as polyester resins or lacquers. Available in 3 ml sizes. The pipette is made of PE, which ensures chemical resistance and durability when used with various cold-curing plastics. This makes it an essential tool for both professionals and DIYers working with synthetic resins and lacquers.
Mixer - stirrer
Mixer mini
Plastic mixing rod for mixing small quantities of resin.
Mouth mask Star Dust P2
Mouth mask star dust P2
This mask provides protection against fine dust when working with fibers, fillers, or during sanding. This mask provides reliable protection against fine dust, which is essential when working with fibers, fillers, and during sanding. It filters harmful particles from the air, allowing you to work safely without the risk of respiratory problems caused by dust inhalation. Furthermore, the mask ensures comfortable wear thanks to its ergonomic fit and breathable materials. It can be easily adjusted to fit different facial shapes, allowing you to work comfortably for extended periods without discomfort. This not only helps prevent health risks but also increases your work efficiency in dusty conditions.
perfect mixture of 2k adhesive
Mixer for dual-cartridge adhesive 50 ML 10:1 (10 pieces)
A special mixer designed for the homogeneous mixing of two-component adhesives and sealants in a 10:1 mixing ratio. Fits 50 ml cartridges. Supplied in a set of 10.