Polyester prepcoat 5 kg - For a smooth polyester finish - RAL 7035

Name: T40BT pool grey-white 5 KG
Brand: Vosschemie
SKU: UPH01100175
Price: 133.04 EUR
Availability: OutOfStock

T40BT pool grey-white 5 KG

UPH01100175

Deliverable in 1-5 working days

Is a 2-component, pre-accelerated sealer (precoat) based on neopentylglycol and teraphthalic acid that has good water and chemical resistance after . Should always be finished with a LT 40 SB. Available in 5 kg, 20 kg and 225 kg packaging in colourless or pre-coloured grey-white in 5 kg, 10 kg and 20 kg.

€133.04 / st

Applications

Primer after lamination. Provides a better waterproofing, finishing and chemical resistant layer, also filling and primer for Topcoat LT 40 SB. With a maximum water temperature of 30°C. Can be coloured by adding 10-20% UP pigment. Can be sprayed with 5% styrene or acetone.

Usage

Mix the T 40 BT with 2-3% Mekp hardener and possibly an additional 1% cobalt accelerator when mixing colour pigments, as these can have a delaying effect (never mix cobalt directly with Mekp hardener, but mix it into the resin separately). Apply with brush or roller. Brush out as thick as possible. Stays slightly sticky to the surface, for better adhesion with the topcoat LT 40 SB. May be applied in two layers.Pot life: approx. 20 min. at 20°C. Processing temperature: 18-25°C. Always apply small quantities in proportion to the potlife.Tip 1: must cure for 7 days at 20°C, then fill with water.Tip 2: all polyesters can be slowed down with inhibitor.Tip 3: use a different color between the T40BT (precoat) and LT40SB (topcoat). This gives better visual control.Tip 4: if T40BT (precoat) comes into contact with water, it turns white). The quantities in grams below are the same as in ml.

Polyester resin	1% Mekp hardener	2% Mekp hardener	3% Mekp hardener
100 gr	1 gr	2 gr	3 gr
250 gr	2.5 gr	5 gr	7.5 gr
1 kg	10 gr	20 gr	30 gr
5 kg	50 gr	100 gr	150 gr

Safety

Request safety sheet

Always provide appropriate protective clothing and gloves.Avoid prolonged skin contact.Cleaning agent for tools: cleaner M (environmentally friendly substitute for acetone).This product contains styrene and must therefore be handled in accordance with the safety regulations.

Technical specifications

Download technical fiche