Polyester resin primer 1 kg for PVC with hardener

PVC Primer 1 KG + Mekp

UPH01100059

In stock

Is a 2-component, pre-accelerated primer based on iso-neopentylglycolic acid. Gives an improved adhesion on PVC.

Available in 0.25 kg + mekp and 1 kg + mekp.

€36.68 / set

Content

Applications

Adhesive layer for laminating on PVC. As extra waterproofing, finishing and chemical resistant layer. Can be applied on all skimmers, nozzles, light holders, ... To be finished with polyester/vinyl ester and glass mat.

Usage

Mix the resin with 2-3% Mekp hardener. Brush or roll out as thick as possible. Potlife: Approx. 15-20 min. at 20°C. Always make small quantities in proportion to the potlife. The resin remains slightly sticky so that there is better adhesion to the laminate.

Can be worked over after 1-2 hours.
Processing temperature: 18-25°C.
Always provide appropriate protective clothing and gloves. Avoid prolonged skin contact. Cleaning agent for tools: cleaner M (environmentally friendly substitute for acetone).
This product contains styrene and must therefore be handled in accordance with the safety regulations.

Technical specifications

Download technical fiche