Tear-resistant liquid silicone rubber -V sure
Silicone NL A+B 1 KG
SIR12010051
In stock
Is a 2-component polycondensation curing, highly elastic, self-demoulding rubber material based on silicone that reacts after the addition of hardener. This rubber has a high tear resistance and good chemical resistance. Can be used on all surfaces except glass or ceramics. In these moulds, shape pieces can be moulded with UP - EP - PU - zellane.
Can be used in the food industry, e.g. for moulding chocolate and paraffin wax.
Available in 0.5 kg, 1 kg, 5 kg and 20 kg packaging and 200 kg (A-comp.).
Can be used in the food industry, e.g. for moulding chocolate and paraffin wax.
Available in 0.5 kg, 1 kg, 5 kg and 20 kg packaging and 200 kg (A-comp.).
€46.25 / set
Online advice 
Fast delivery from stock 
Guaranteed V-sure quality 
Direct from manufacturer - Pick-up 24/7 in pick-up box
Applications
For the manufacture of negative moulds with difficult shapes and deep incisions.
Is liquid and can be poured easily. Slight shrinkage. If necessary thicken with C-comp. or dilute with Sico Fluid. For use in the food industry, it is best to place the hardened mould in water at approx. 70-80°C for a few hours and allow it to cool down in order to neutralise the silicone.
Usage
- Always ensure a dry and grease-free surface.
- Mix both components in a 5-10% weight ratio and brush out a first layer.
- This ensures a finer reproduction of all details.
- Then pour the mixed rubber over the object.
- For a rubbing mould, you can thicken (if necessary) with thickener C 0.5-1%.
- Potlife: approx. 90-120 min. at 20°C.
- Fully cured after approx. 8 hours.
- Minimum wall thickness 10 mm.
- If you are uncertain of the substrate, it is best to make a test piece or to use Trennspray.
The quantities in grams below are the same as in ml.
| Silicone rubber | 5% hardener | 10% hardener |
| 100 gr | 5 gr | 10 gr |
| 250 gr | 12.5 gr | 25 gr |
| 1 kg | 50 gr | 100 gr |
| 5 kg | 250 gr | 500 gr |
Safety
Technical specifications
Related products
