Universal gelcoat - Coating for laminate 5 kg
G35-1 clear 5 KG
UPH01040925
Deliverable in 1-5 working days
Is a 2 component gel coat based on isophthalic acid neopentylglycole (ISO/NPG) containing polyester resin, which has very good water and weather resistance with increased impact and scratch resistance.
Available in the following packages: 1 kg (+ mekp), 5 kg, 20 kg and 220 kg colourless and in different shades in 5 kg and 20 kg.
Available in the following packages: 1 kg (+ mekp), 5 kg, 20 kg and 220 kg colourless and in different shades in 5 kg and 20 kg.
€61.52 / set
Applications
This gelcoat is mainly used for finishing a laminate in the following cases: construction elements, sanitary fittings, boat building and wherever the fittings need to be given increased water and chemical resistance.
Usage
- The gelcoat is pre-cut and the viscosity is set as standard for brush or roller application.
- Mix the gelcoat before use, avoid air bubbles under mixing the resin.
- The temperature of the gelcoat, the working area and the moulds should be 18-25°C.
- The air humidity should not exceed 85%.
- Mix 2 - 3% MEKP hardener with the gel coat.
- Processing time is +- 15 min at 20°C.
- Stays slightly sticky for optimal adhesion to the laminate.
- The thickness of the gel coat should be approx. 300-600 micron, depending on the application.
- Use a gelcoat brush to determine the layer thickness. the gelcoat can be applied in two layers.
- Can be coloured with polyester dye. Always make small quantities, in proportion to the potlife.
The quantities in grams below are the same as in ml.
Polyester resin | 1% Mekp hardener | 2% Mekp hardener | 3% Mekp hardener |
100 gr | 1 gr | 2 gr | 3 gr |
250 gr | 2.5 gr | 5 gr | 7.5 gr |
1 kg | 10 gr | 20 gr | 30 gr |
5 kg | 50 gr | 100 gr | 150 gr |
Safety
- Ensure adequate ventilation or use a suitable respiratory protection mask.
- Wear suitable protective clothing and gloves.
- Consult our safety data sheets for further information.
- Avoid prolonged skin contact.
- Cleaning agent for tools: cleaner M (environmentally friendly alternative to acetone).
- This product contains styrene and must therefore be handled in accordance with the safety instructions.